Your Cart


Model: 421-0045-00
The Photon Replicator Kit includes a Photon Replicator Board, as well as a wearsaver and rear cover, that emulates the 15-pin D-sub electrical interface to Photon 320. A "horseshoe" shaped bracket is also included that, when attached to the Tau, exactly mimics the mounting scheme of the Photon 320 c..
Model: 261-1477-00
The Tau 2 board spacer accessory allows add-on electronics to be securely mounted to the camera body. An example is the Camera Link module accessory for Tau 2...
Model: 421-0058-00
Expansion board for Tau SWIR cameras that matches the functionality of the VPC module, and adds the ability to access digital data via mini-Camera Link connection. Installation instructions can be found in the Tau SWIR Users Guide. The Kit includes: Camera Link Expansion Board 6-ft MCX to..
Model: 421-0059-00
The Tau SWIR video/power/control (VPC) is an accessory that adapts the native high-density electrical connector to a mini-USB interface for power and control, and mini-coaxial (MCX) connector for analog video. The Kit includes: VPC adapter 6-ft MCX to BNC video cable 3-ft USB-A to Mini-B c..
Model: T198583
Key features: Report templates (horizontal IR + DC, vertical IR + DC, horizontal IR + IR). Manual IR/Visual Image Grouping Import images from your camera to your computer. Apply filters when searching for images. Search all text in images and text annotations. Store the five latest search cr..
Model: T198342ACC
Focus adjustment tool for A35 and A65..
Model: 285-0029-02
FLIR 12V 4" Blackbody Source for ALC & Supplemental FFC, offers a uniform temperature source for FLIR Tau 2 Thermal Cameras.Low cost 4-inch blackbody which provides a uniform temperature source when using FLIR's Alt Lens Cal software to field-calibrate lens-less Photon or Tau cameras with third-..
Model: 261-2664-00
Side Mount Payload Bracket (1)Side-mounting payload bracket for the PTU-5 pan tilt. Up to 3 lb capacity per side, 6 lb total with two side brackets. Side bracket use requires removal of the PTU-5 top bracket. (Side and top brackets cannot be used together at the same time.)..
RHP-BOS-CL-SY-IF Camera Link Module Converts the Boson Camera to Camera Link and provides Sync access The RHP-BOS-CL-SY-IF Camera Link module is an expansion board for the FLIR Boson camera that can connect USB power and communication, analog video, and digital data via Camera Link..
Model: RHP Boson Remote Control Interface with HD
RHP-BOS-RC-HD-IF Integrate the Teledyne FLIR Boson into your UAS. The RHP-BOS-RC-HD-IF allows you to control the Boson camera remotely using a 16 Channel S-Bus Signal or up to 5 PWM Signals from your wireless Joystick Remote Control System. Now you can assign any available parameter on t..
Model: rhp-bos/tau-rp-if
RHP-BOS-TAU-RB-IF Boson Tau Replicator Interface The replicator board adapts the Tau 2 interfaces electronically to make them compatible to the FLIR Boson Camera. By adapting the Boson's native 80-pin Hirose connector to the 50-pin TAU 2 connector used on FLIR's Tau 2 camera accessories, i..
Model: 500-1120-00
F-/FC-Series Pedestal Mount For use with: TRITON™ F-SERIES ID ELARA™ FC-Series R F-/FC-Series Pedestal Mount Part Number 500-1120-00 For use with: TRITON™ F-SERIES ID ELARA™ FC-Series R..
Model: 500-1121-00
F-Series Small Pole Adapter For pole diameters between 65mm-110mm For use with: TRITON™ F-SERIES ID..
Model: 500-1123-00
F-Series ID wall mountF-Series Wall Mount for the FLIR Triton™ F-Series ID Part Number 500-1123-00..
Model: 4124857
FLIR Power Supply Assembly - 24VAC Part Number 4124857 Works with: TRITON™ F-SERIES ID TRITON™ PT-SERIES HD TRITON™ A310 PT (SECURITY)..
Model: T199698
Environmental Housing for the FLIR Ax5 Specially designed for the FLIR Ax5 series, the environmental housing offers effective protection against dust and water jets in harsh environment. The front part covers the camera lens using high transmittance Coated Germanium infrared glasses with sealing ri..
Model: 500-1119-00
Corner Mount For use with: TRITON™ F-SERIES ID ELARA™ FC-SERIES O ELARA™ FC-Series R ELARA™ FC-SERIES ID F-/FC Series Corner Mount Part Number 500-1119-00 For use with: TRITON™ F-SERIES ID ELARA™ FC-SERIES O ELARA™ FC-Series R ELARA™ FC-SERIES ID..
Model: 4132982 FC Series Pole adapter FC
FC Series Pole adapterFLIR FC Series Pole Adapter 4132982 The FC-Series Wall Mount  can be fixed to a Pole with this Pole Mount Accessory.  If the camera is mounted on a pole, an Ethernet cable should run at least to the bottom of the pole, so a laptop could be temporarily connected directly to..
Model: CB-PLBX-62
Pole Junction Box Pole Junction Box for FB-Series Thermal Security Cameras. Allows the FLIR FB Series O and FB Series ID cameras to be mounted on a Pole..
Model: CB-WLBX-62
Wall Junction BoxWall Junction Box for FB-Series Allows the FLIR FB Series O and FB Series ID cameras to be mounted on a Wall..
Showing 1 to 20 of 20 (1 Pages)