Available Accessories
FLIR 12V 4" Blackbody Source for ALC & Supplemental FFC, offers a uniform temperature source for FLIR Tau 2 Thermal Cameras.Low cost 4-inch blackb..
$1,795.00
The Photon Replicator Kit includes a Photon Replicator Board, as well as a wearsaver and rear cover, that emulates the 15-pin D-sub electrical interfa..
$400.00
PCB Assembly
Lens Focus Tool
Tripod Mount
VPC Module
Photon Replicator Board
Locking Nut
Tau Locking Nut
Tau Quick Start Guide
USB Flash Driv..
$999.99
The Tau 2 board spacer accessory allows add-on electronics to be securely mounted to the camera body. An example is the Camera Link module accessory f..
$10.00
P/N: FLIR-VPC-REG
5 Volt DC 500mA Regulated Output to Mini USB for VPC Module - 7~32 Volt DC Input 18" Bare Leads with Reverse Voltage Protection
$5..
$50.00
The FLIR Tau VPC Module is an interface for the camera to provide power and obtain video. It also facilitates serial communication for camera command ..
$200.00
The Camera Link module is an expansion board for the Tau cameras that matches the functionality of the VPC Module and adds the ability to access digit..
$750.00
FLIR NFOV Lens Holder for the FLIR TAU 2 Thermal Cameras..
$65.00
FLIR Tau PCB Wearsaver with Solder PadsA low-profile adapter that attaches to the Tau's 50-pin Hirose connector, furnishing a solder pad interface. Sc..
$117.00
This expansion board adapts the Tau camera's native 50-pin Hirose connector to the 30-pin SAMTEC connector used on FLIR's Photon cameras. The replicat..
$140.00
FLIR SDK software for the FLIR TAU Series Cameras
The Tau Software Developer's Kit (SDK part number enables camera control using one of several pro..
$995.00
This adapter allows you to convert two of the mounting points on the Tau camera to a standard 1/4" x 20 tripod mounting plate.
This adapter also wo..
$50.00
The Tau Focus Tool can be used to change the focus of the wide field of view (WFOV) 5.5mm, 7.5mm, 9mm, 13mm, or 19mm lenses.The focus-tool accessory, ..
$60.00
The lens locking ring is designed to mount a Tau WFOV camera into a bulkhead. The M29 x 1.0 thread on the outside of the lens mount flange is placed t..
$20.00
The lock nut tool will attach to a torque wrench for proper tightening of the lens locking ring. Torque the locking ring to 4.0 in-lbs...
$70.00
Controlling your thermal core is easy
Control the FLIR TAU2 and VUE remotely with our RC Interface.
Assign vir..
$499.00
FLIR Tau 2 VPC Module
- USB Connect to TAU
- Control w/TAU GUI
- Power Thru USB 5VDC
- MCX Video Connector
- Model: 421-0039-00
- Weight: 1.00lb
- SKU: 421-0039-00
$200.00
