Gigabit PoE injector 16 W, with multi-plugs
Input: 100–240 V, 50–60 Hz
Output: 56 VDC
Size (L × W × H)
86× 50 × 33 mm (3.4 × 2.0 × 1.3 in.)
Reduces the need to open cabinets for inspections
May reduce the need for layers of heavy protective gear*
Easy to install
Shortens inspection time
Cuts the cost of inspections
*Personal protective equipment (PPE) may still be required as determined by your plant safety personnel.
The Photon Replicator Kit includes a Photon Replicator Board, as well as a wearsaver and rear cover, that emulates the 15-pin D-sub electrical interface to Photon 320. A "horseshoe" shaped bracket is also included that, when attached to the Tau, exactly mimics the mounting scheme of the Photon 320 c..
PT-Series pedestal mount 4119497 PT-Series adapter plate 4119468
6 each 1/4-20 FHMS x 3/4” Hex, S.S. 6 each 5/16-18 x 3/4 SHCS, S.S.
6 each 5/16 split washer
6 each 5/16 flat washer
Two extra pieces of each attaching part
The FLIR PT-Series pedestal mount (4119497) and adapte..
Side Mount Payload Bracket (1)Side-mounting payload bracket for the PTU-5 pan tilt. Up to 3 lb capacity per side, 6 lb total with two side brackets. Side bracket use requires removal of the PTU-5 top bracket. (Side and top brackets cannot be used together at the same time.)..
Are you Looking for a specific case for your application? Let us know.This tactical carrying case is constructed from durable ABS plastic to withstand harsh conditions, shock, vibration, and moisture. FLIR designed this case to protect its First Mate cameras for transport and field use. Available in..
Lens Focus Tool
Photon Replicator Board
Tau Locking Nut
Tau Quick Start Guide
USB Flash Drive
Latching Cable Assembly
Latching Connector, 30pin
Contact Pins (30ea)
1.5mm Hex Key
Everything You Need To Get Started
The FLIR TAU - 4-Inch Blackbody Source for ALC & Supplemental FFC, offers a uniform temperature source for FLIR Tau 2 Thermal Cameras.Low cost 4-inch blackbody which provides a uniform temperature source when using FLIR's Alt Lens Cal software to field-calibrate lens-less Photon or Tau cameras with ..
The Camera Link module is an expansion board for the Tau cameras that matches the functionality of the VPC Module and adds the ability to access digital data via Camera Link connection. The Camera Link module takes CMOS-type digital data from the Tau camera and converts it to Camera Link. This modul..
This expansion board adapts the Tau camera's native 50-pin Hirose connector to the 30-pin SAMTEC connector used on FLIR's Photon cameras. The replicator board makes the Tau camera electrically pin-compatible to a Photon camera.
Without a Photon Replicator Board, the input voltage range is 4.0-6.0 V..