Control the FLIR BOSON remotely with the "RC-HD-IF" Remote Control Interface.
- 6 to 26 Volts DC Input
- HDMI and Composite Outputs
- Reverse Polarity Protection
- Control w/RC Receiver
- S-Bus & PWM
- Compatible with most digital HDMI transmitters
- Setup and Calibration Software Included
- Model: rhp-bos-rc-hd-if
- Weight: 1.00lb
- SKU: rhp-bos-rc-hd-if
When attaching this Interface, please use proper personal grounding (or grounding wrist strap) to prevent static damage to the module.
Integrate the FLIR Boson into your UAS.
The RHP-BOS-RC-HD-IF allows you to control the Boson camera remotely using a 16 Channel S-Bus Signal or up to 5 PWM Signals from your wireless Joystick Remote Control System. Now you can assign any available parameter on the Boson to any knob, switch or lever on your Joystick Remote Controller and adjust these camera parameters ‘on-the-fly’.
With the HD Video output, video signal can be transmitted securely through a video transmitter in 720 or 1080p. The analog output allows for a composite video signal simultaneously, enabling you to connect to a recording device.
This module accepts a wide input voltage range of 6 to 26 Volts DC with reverse polarity protection while powering your Remote Control receiver with a regulated 5 Volts DC.
Both HD and Composite Video Outputs are available allowing connection to two separate video devices with no signal loss.
Customize and Save ConfigurationsSave configurations for different applications.
• Control via PC
• 16 Channels (S-Bus)
• 5 Channel PWM.
• 5 Channel D-Pad.
• Customize and Assign parameters.
Video OutputsOutput video signals to Analog and HD simultaneously.
• Composite Output
for use with analog transmitters.
• HD Output
use with the latest digital technology.
• Ideal for digital SD recording devices
Control the Boson RemotelyAssign any available parameter on the Boson for ‘on-the-fly’ control.
• Continuous Digital Zoom
• Color Palette Selection
• (FFC)Flat Field Correction
• (DDE)Digital Detail Enhancement
• Wired or Wireless control