Menu
Your Cart

RHP BOSON VPC TTL Interface Module

RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
RHP BOSON VPC TTL Interface Module
  • Availability: In Stock
  • Brand: RHP International
  • Model: RHP-BOS-VPC-TTL-IF
  • Weight: 1.00lb
  • SKU: RHP-BOS-VPC-TTL-IF
$149.00

Available Options

When attaching this Interface, please use proper personal grounding (or grounding wrist strap) to prevent static damage to the module.

RHP-BOS-VPC-TTL-IF

Video Power Communication (VPC) Transistor-Transistor Logic Interface Module




Power Protection

With the intelligent polarity sensing protection, power can be provided via the USB connection or DC Voltage using the provided 6-Pin Video/Power cable or the 7-Pin Pico Blade cable.



3 Video Output Options

Video can be viewed through either the supplied JST to USB/Video cable, JST to Bare End Lead cable or 7-Pin Pico Blade to Bare End Lead cable.



Sync Ready*

Either video output can be changed to provide Sync Input/Output, via a jumper on the back of the RHP-VPC-TTL Board.
Control is maintained over USB or 3.3V TTL signals. This makes TTL Support available for any project integration.


*Please Note: External Sync is disabled on Boson <9 Hz Cameras.

The use of external sync on these cameras is not supported because pulses cannot be correlated to a specific output frame because of the way the reduced frame rate video is created. If attempted, the camera will reject commands to begin external sync mode.

This kit includes:

  • 6-PIN JST to USB/RCA Video cable (1)
  • 6-PIN JST to Bare End Leads (1)
  • 7-PIN PICO Blade to Bare End Leads (1)
  • M1.6 6mm Screws (4)
  • M1.6 10mm Screws (4)
  • Rear Cover for VPC-TTL Board (1)
  • Allen Key (1)
  • RHP VPC-TTL-IF Board (1)
  • Quick Start Guide (1)

 

Power Requirements:  5 Volts DC - 26 Volts DC
Power Dissipated:  Avg. 0.84W - Max. 2W
Dimensions:  21mm x 21mm
Weight:  2.6 grams
Control:  USB 2.0 and/or 3.3V TTL (1.8V Logic Available)
Video Output:  NTSC 30Hz / PAL 25Hz
Sync Output: (if configured) Master/Slave


INFORMATION
What's In The Box

Boson VPC TTL IF Module - What's in the Box

Click Photo to Enlarge


Specifications
Overview  
Input Voltage 5-26VDC - Reverse Polarity Protected
Power Dissipation <0.1W (Camera Not Included),
3.5W Max With Camera,
6W Total Fused
Video Channels 2 Analog NTSC/PAL Switchable Outputs, USB Digital Video
Control Channels USB 2.0 (Video + Control)
GPIO Channels Sync Output Available - Call for details
Interface Connector

6-Pin JST SHR-06V-S-B
7-Pin Picoblade

Size 21 x 21 x 1.6mm (w/o Connector)
21 x 21 x 6mm (w/Connector)
Weight 2.6g without camera
Mounting Holes Four M1.6 Holes
Operating Temp. Range -40°C to 80°C
Storage Temp Range -50°C to 105°C
Operational Altitude 12km (max altitude of a commercial airliner or airborne platform)

RHP Interface Assemblies

Write a review

Note: HTML is not translated!
Bad Good
Captcha